Civil

Civil category

SEA Sydney Water

What is Specialist Engineering Assessment (SEA)?

/ BOA, Building Over and Adjacent to Pipe Assets, Certification, Civil, Civil Engineering, Civil Works, Class 2 Building, Design Practitioner, Report, SEA, Structural /

Introduction The Specialist Engineering Assessment (SEA) is a critical process for developments in proximity to critical infrastructure, especially Sydney Water (SW) assets. This post, guided by Prime Consulting Engineers‘ expertise, explores SEA in-depth, focusing on ‘Out of Scope’ (OOS) works, projects that fall outside the standard guidelines, and the SEA procedure as defined by Sydney […]

What is Specialist Engineering Assessment (SEA)? Read More »

What is Stormwater Management Plan?

/ Absorption Trench Design, Civil Works, Drainage, Erosion and Sediment Control, Hydraulics, OSD Tank Design, Stormwater Management Plan /

Introduction A stormwater management plan (SWMP) is a comprehensive plan that outlines strategies for managing, treating, and directing stormwater runoff in an urban area. The goal of an SWMP is to minimize the adverse impacts of stormwater on the environment and local communities, while also protecting public health and safety. An effective stormwater management plan

What is Stormwater Management Plan? Read More »

Tower Crane Foundation Design

/ BBR, Certification, Civil Engineering, Deep Excavation, Deep Foundation, DYWIDAG, Finite Element Analysis, Ground Anchor Design, Inspection Report, Micro Pile Design, Micropile Design, Non-linear Analysis, Residential Development, Shoring Design, Slope Stability Analysis, Structural Analysis, Structural Design, Structural Engineering, Temporary Structures, Temporary Works, Wind Analysis

Tower Crane Foundation Design Parramatta, NSW PCE prepared structural analysis and design of Heavy Duty Tower Crane foundation, supported on Micropile system, for construction of the Iconic High Rise Residential Building in the heart of Parramatta. Because of the proximity to the deep excavation (less than 1.5m to shoring wall) and other site constraints, conventional

Tower Crane Foundation Design Read More »

Newport, NSW

/ Beam Design, BOA, Building Over and Adjacent to Pipe Assets, Civil Engineering, Civil Works, Class 2 Building, Deep Excavation, Deep Foundation, Design Practitioner, Driveway Vehicular Crossing, Finite Element Analysis, Landscaping, Non-linear Analysis, Post-tensioned Slab, PT Slab, Residential Development, Retaining Wall, SEA, Shoring Design, Special Engineering Assessment, Steel Member Design, Structural Analysis, Structural Design, Structural Engineering, Wind Analysis

Civil, Structural & Hydraulics Engineering Newport, NSW We have been engaged to provide Civil, Structural & Hydraulics  Engineering Services for this class 2 residential development at Newport, NSW.  Our engagement was but not limited to: Structural design of reinforced concrete structure Civil design of retaining walls, vehicular crossing details & driveway longitudinal sections For more

Newport, NSW Read More »

Newport, NSW

/ Beam Design, BOA, Building Over and Adjacent to Pipe Assets, Civil Engineering, Civil Works, Class 2 Building, Deep Excavation, Deep Foundation, Design Practitioner, Drainage, Driveway Vehicular Crossing, Erosion and Sediment Control, Facade Design, Facade Engineering, Finite Element Analysis, Formwork Design, Gutter and Downpipe, Inspection Report, Landscaping, Non-linear Analysis, Onsite Detention Tank Design, OSD Tank Design, Post-tensioned Slab, PT Slab, Residential Development, Retaining Wall, Scaffolding Design, Shoring Design, Steel Member Design, Stormwater Management Plan, Structural Analysis, Structural Design, Structural Engineering, Wind Analysis

Civil, Structural & Hydraulics Engineering Newport, NSW We have been engaged to provide Civil, Structural & Hydraulics  Engineering Services for this class 2 residential development at Newport, NSW.  Our engagement was but not limited to: Structural design of reinforced concrete structure Civil design of retaining walls, vehicular crossing details & driveway longitudinal sections Hydraulics design

Newport, NSW Read More »

Traffic Lights

/ Certification, Civil Engineering, Civil Works, Deep Foundation, Finite Element Analysis, Formwork Design, Inspection Report, Micro Pile Design, Micropile Design, Non-linear Analysis, Road Design, SEA, Slope Stability Analysis, Special Engineering Assessment, Structural Analysis, Structural Design, Structural Engineering, Wind Analysis

Structural Engineering Traffic Lights Foundation Design, NSW Wide We have been engaged in the design of numerous traffic light foundations throughout NSW. The image below shows the installation of one of these traffic lights for Newly built Bunnings at Victoria Road – Frank Street intersection, Gladesville. For more projects, visit our Projects page. PREVIOUS PROJECT

Traffic Lights Read More »

suspension bridge design

Hallett Cove, SA

/ Cable Analysis, Civil Engineering, Dynamic Frequency Analysis, Finite Element Analysis, Harmonic Response Analysis, Non-linear Analysis, Peer Review, Slope Stability Analysis, Steel Member Design, Structural Analysis, Structural Design, Structural Engineering, Suspension Bridge Design, Transient Response Analysis, Wind Analysis

Suspention bridge Design Pedestrian Suspension  Bridge for Marion Coastal Walkway, SA PCE has been engaged to review the structural design of Pedestrian Suspension for  Bridge Marion Coastal Walkway, SA. We successfully delivered this project within allocated timeframe and nominated some rectifications that were deemed necessary for the integrity of the structure. Our engagement: Finite Element Analysis

Hallett Cove, SA Read More »

suspension bridge design

Rockhampton, QLD

/ Cable Analysis, Civil Engineering, Dynamic Frequency Analysis, Finite Element Analysis, Harmonic Response Analysis, Non-linear Analysis, Peer Review, Slope Stability Analysis, Steel Member Design, Structural Analysis, Structural Design, Structural Engineering, Suspension Bridge Design, Transient Response Analysis, Wind Analysis

Suspention bridge Design Pedestrian Suspension  Bridge at Gracemere Rockhampton, QLD We have been engaged to review the structural design of Pedestrian Suspension  Bridge at Gracemere Rockhampton, QLD. We successfully delivered this project within allocated timeframe and nominated some rectifications that were deemed necessary for the integrity of the structure. Our engagement: Finite Element Analysis (FEA) 

Rockhampton, QLD Read More »

Bingara Gorge Skatepark, NSW

/ Certification, Civil Engineering, Civil Works, Inspection Report, Landscaping, Retaining Wall

Inspection Certificate Bingara Gorge Skatepark, NSW PCE was involved to provide inspections during construction of the Skatepark for Wollondilly Shire Council in order to issue Certificate of Structural Adequacy. Additionally we supervised and certified the construction of foundations for shelter structures at this park. For more projects, visit our Projects page. PREVIOUS PROJECT NEXT PROJECT

Bingara Gorge Skatepark, NSW Read More »

Brookvale public school

Brookvale Public School, NSW

/ Beam Design, Drainage, Erosion and Sediment Control, Finite Element Analysis, Formwork Design, Non-linear Analysis, Onsite Detention Tank Design, OSD Tank Design, Portal Frame Design, Retaining Wall, Scaffolding Design, Steel Member Design, Stormwater Management Plan, Structural Analysis, Structural Design, Structural Engineering, Wind Analysis

Civil, Structural & Hydraulics Design Brookvale Public School, NSW We were engaged to provide Civil, Structural and Hydraulics design for this magnificent steel framed structure with brick and glass cladding at Brookvale Public School.  Our engagement was  but not limited to: Structural design for the steel frame structure and footing  Flood analysis On-site Detention Tank

Brookvale Public School, NSW Read More »